Wapo писал(а):Неплохо бы еще и показать /etc/dahdi/system.conf
Код: Выделить всё
# Where <driver> is the name of the driver (e.g. eth), <address> is the
# driver specific address (like a MAC for eth), <numchans> is the number
# of channels, and <timing> is a timing priority, like for a normal span.
# use "0" to not use this as a timing source, or prioritize them as
# primary, secondard, etc. Note that you MUST have a REAL DAHDI device
# if you are not using external timing.
#
# Creating dynamic SPAN on eth1 for ASTEROID2 with MAC 00:55:55:55:55:00
# in CAS mode with timing priority == 1.
dynamic=eth,eth1/08:00:27:59:2e:39,128,0
# Setting ALAW for timeslots 1-30
alaw=1-128
# Setting the OSLEC Echo Canceller
# echocanceller=oslec,1-128
# Setting loopstart FXO signaling (peer is FXS) on channels 8-15,
# loopstart FXS signaling (peer is FXO) on channels 23-30.
fxsls=8-15
fxols=23-30
# Setting correct zone info (tone info)
loadzone=us
defaultzone=usWapo писал(а): а также что происходит при service dahdi restart.
Код: Выделить всё
[root@localhost ~]# service dahdi restart
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wcte13xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
Running dahdi_cfg: [ OK ]
Скрин во вложенииded писал(а): Проверять dahdi_tools