Добрый день.
Почему-то не получается занять в потоке больше 24 каналов, словно бы это не E1 а Т1. Провайдер говорит у него все нормально и разрешено 30 каналов. Может у меня где в настройках накосячено?
pci:0000:04:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
Asterisk 1.6.0.26-FONCORE-r78
/etc/dahdi/system.conf
## Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Global data
loadzone = ru
defaultzone = ru
/etc/asterisk/chan_dahdi.conf
;
; DAHDI telephony
;
; Configuration file
[trunkgroups]
[channels]
#include /etc/asterisk/dahdi-channels.conf
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
;echocancel=yes
echocancel=no
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callerid=asreceived
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include setup-pstn configs
#include dahdi-channels.conf
group=1
;Include PBXconfig configs
#include chan_dahdi_additional.conf
cidstart=ring
cidsignalling=bell
/etc/asterisk/dahdi-channels.conf
; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=1,12
context=context-e1
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
;context = default
group = 63